You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Did not help, tried that first even backed up to 5 watts.
Only when i went into the service menu and lowered power in AM to just under 25 watts carrier and listening on my FT 2000-D as receiver i could get it right without distortion.
Now having 23 watt carrier and almost 100 watts fully modulated without distortion.
Seems regulating the P.A. back did nothing i needed to get the drive back into the section where the AM modulation is done through the service menu.
That is now done and it sounds good, now getting good reports in AM about the modulation.
Not using that a lot, but if it is on the radio it must work properly.

[QUOTE="Justme, post: 739483, member: 6187"] Did not help, tried that first even backed up to 5 watts. Only when i went into the service menu and lowered power in AM to just under 25 watts carrier and listening on my FT 2000-D as receiver i could get it right without distortion. Now having 23 watt carrier and almost 100 watts fully modulated without distortion. Seems regulating the P.A. back did nothing i needed to get the drive back into the section where the AM modulation is done through the service menu. That is now done and it sounds good, now getting good reports in AM about the modulation. Not using that a lot, but if it is on the radio it must work properly. [/QUOTE]

Top Bottom