You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

The area below and behind the Load control is where the relays will be. Either three identical clear-plastic enclosed relays in a row, mounted on a vertical plug-in circuit board. -OR- two smaller white-plastic relays about an inch square, with a third clear-plastic enclosed plug-in relay. All of them on a circuit board bolted to the horizontal chassis deck.

And there are more than "two" 300A amplifiers. But only two arrangements of the relays on the top side.

[ATTACH]21233[/ATTACH] [ATTACH]21234[/ATTACH]

Hope this helps

[QUOTE="tecnicoloco, post: 594598, member: 190"] The area below and behind the Load control is where the relays will be. Either three identical clear-plastic enclosed relays in a row, mounted on a vertical plug-in circuit board. -OR- two smaller white-plastic relays about an inch square, with a third clear-plastic enclosed plug-in relay. All of them on a circuit board bolted to the horizontal chassis deck. And there are more than "two" 300A amplifiers. But only two arrangements of the relays on the top side. [ATTACH]21233[/ATTACH] [ATTACH]21234[/ATTACH] Hope this helps [/QUOTE]

Top Bottom