You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks DB, I will try and fix these models according to your tips.

BTW, I also found that when I raised the cmctest1b model back up to 32' feet it made a pattern similar to my original model at 32' feet, and that does not seem right.

I used really small wires too. I think the differences in wire size and soil type went a long way in making the differences my model shows, but that is just a guess at this point. I finally used the Ground Description to tune in on your results.

I did not check the AGT, but no errors popped up on my models either. I will check for segment and geometry errors, and see if I missed something.

Thanks for the details.

[QUOTE="Marconi, post: 549560, member: 903"] Thanks DB, I will try and fix these models according to your tips. BTW, I also found that when I raised the cmctest1b model back up to 32' feet it made a pattern similar to my original model at 32' feet, and that does not seem right. I used really small wires too. I think the differences in wire size and soil type went a long way in making the differences my model shows, but that is just a guess at this point. I finally used the Ground Description to tune in on your results. I did not check the AGT, but no errors popped up on my models either. I will check for segment and geometry errors, and see if I missed something. Thanks for the details. [/QUOTE]

Top Bottom