You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Here is my thoughts on the mic. The shape and weight feel great in the hand, (the heft comes from weights they put in the mic). The build quality is solid and bang around worthy. The mic has enough drive to push most transceivers to 100% modulation no problem. The mic element has a low end cut off at around 300hz so yes, it does lack bottom end but doesn't sound tinny. Pretty much sounds the same as those stock cobra coffin mics or any other cheap cb mic. For a solid replacement stock mic with good drive( due to element impedance), and that will last it is a great choice.

[QUOTE="groundwire, post: 798209, member: 42117"] Here is my thoughts on the mic. The shape and weight feel great in the hand, (the heft comes from weights they put in the mic). The build quality is solid and bang around worthy. The mic has enough drive to push most transceivers to 100% modulation no problem. The mic element has a low end cut off at around 300hz so yes, it does lack bottom end but doesn't sound tinny. Pretty much sounds the same as those stock cobra coffin mics or any other cheap cb mic. For a solid replacement stock mic with good drive( due to element impedance), and that will last it is a great choice. [/QUOTE]

Top Bottom