You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

New Newbie Build.

So when I attach the LMR400 to the MAXX2000 I will use a midpoint ground system to ground Coax to Mast, then go 18-24" down from antenna connection and do a 8 turn 8" Choke.
So I make this first assembly & null this out based on every other 1/2 Wave measurement.
So first line is approx. 38' + 2' for choke =40'
1/2Wave on 27.205 is 15.37'.
So this section will need to be roughly 47' & start cutting till nulled out.
Correct?

Then we hit a poly phaser in an enclosure before we go into garage.

[QUOTE="Crawdad7, post: 829287, member: 56614"] New Newbie Build. So when I attach the LMR400 to the MAXX2000 I will use a midpoint ground system to ground Coax to Mast, then go 18-24" down from antenna connection and do a 8 turn 8" Choke. So I make this first assembly & null this out based on every other 1/2 Wave measurement. So first line is approx. 38' + 2' for choke =40' 1/2Wave on 27.205 is 15.37'. So this section will need to be roughly 47' & start cutting till nulled out. Correct? Then we hit a poly phaser in an enclosure before we go into garage. [/QUOTE]

Top Bottom