You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I was thinking more like having a fixed 4 pin connector going into the radio, BUT, it has a flat face with 4 circular contact rings where the second half of the connector case would have spring loaded pins that contact the rings. A center thumb screw would tighten the cases together when the desired position is reached. The four pins on the outer connector case would correspond to whatever radio it is plugged into.

[QUOTE="Greg T, post: 844873, member: 42791"] I was thinking more like having a fixed 4 pin connector going into the radio, BUT, it has a flat face with 4 circular contact rings where the second half of the connector case would have spring loaded pins that contact the rings. A center thumb screw would tighten the cases together when the desired position is reached. The four pins on the outer connector case would correspond to whatever radio it is plugged into. [/QUOTE]

Top Bottom