You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I replaced a 26v 100mf cap on the board. I cut the leads tight to the underside but I did not notice that the legs had touched the heatsink. I saw the top of the cap had a slight bulge and that annoying relay thing was happening again. Sooooo again I replaced the cap but this time I used my nail clippers to really cut the legs and solder close to the board. I tested that thing all day today talking gibberish just to keep the relay popping in and I out. Not once did it stick!!! I also noticed my dk was slightly higher and my pep was outrageously higher. I now have a nice working amp..

[QUOTE="unit511, post: 510496, member: 23817"] I replaced a 26v 100mf cap on the board. I cut the leads tight to the underside but I did not notice that the legs had touched the heatsink. I saw the top of the cap had a slight bulge and that annoying relay thing was happening again. Sooooo again I replaced the cap but this time I used my nail clippers to really cut the legs and solder close to the board. I tested that thing all day today talking gibberish just to keep the relay popping in and I out. Not once did it stick!!! I also noticed my dk was slightly higher and my pep was outrageously higher. I now have a nice working amp.. [/QUOTE]

Top Bottom