You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

This particular radio has no built-in feature for this. The add-on variable-carrier kits sold for Cobra 29 type radios will work on this one.

But only if the tech that does the install can work out the instructions for him/herself. The schematic diagram for that radio is on CB Tricks.

But there is no convenient wire jumper that can be removed from the circuit board and replaced with a carrier-control circuit.

As a rule, this involves cutting a gap in one copper foil trace on the circuit board, and hooking it to each side (the right side) of the cut.

There might be a detailed "how-2" for this online somewhere. Never have looked for it.

73

[QUOTE="nomadradio, post: 787151, member: 22"] This particular radio has no built-in feature for this. The add-on variable-carrier kits sold for Cobra 29 type radios will work on this one. But only if the tech that does the install can work out the instructions for him/herself. The schematic diagram for that radio is on CB Tricks. But there is no convenient wire jumper that can be removed from the circuit board and replaced with a carrier-control circuit. As a rule, this involves cutting a gap in one copper foil trace on the circuit board, and hooking it to each side (the right side) of the cut. There might be a detailed "how-2" for this online somewhere. Never have looked for it. 73 [/QUOTE]

Top Bottom