You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

.

That's because its a class C AM only amplifier.
Now some add an SSB delay capacitor to the relay circuit so the relay stops chattering but even doing that does not make it an SSB amplifier unless it has SSB biasing which is a whole new ball game, and unless you know what your doing to add THAT you could damage the pills.
That amp should do 400-450w PEP all day.

A low pass filter does not get soldered into the amp. There are not a lot of amp builders that incorporate a low pass filter inside the amp so don't worry about that.

A ground strap from the rear panel to the copper board is a good idea, thanks Brandon, as it does not have one.

[QUOTE="Xracerx13, post: 827342, member: 64718"] . That's because its a class C AM only amplifier. Now some add an SSB delay capacitor to the relay circuit so the relay stops chattering but even doing that does not make it an SSB amplifier unless it has SSB biasing which is a whole new ball game, and unless you know what your doing to add THAT you could damage the pills. That amp should do 400-450w PEP all day. A low pass filter does not get soldered into the amp. There are not a lot of amp builders that incorporate a low pass filter inside the amp so don't worry about that. A ground strap from the rear panel to the copper board is a good idea, thanks Brandon, as it does not have one. [/QUOTE]

Top Bottom