You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Time for another speed bump. The M104C takes a mast size of 2" OD. That's a good fit for the Yaesu rotor and thrust bearing I have. The M104 is being mounted horizontally and the M58 will be just above it without the ground plane radials. The V58 takes a 1.25" mast so I need to be able to reduce the 2" aluminum mast extending just past the M104C into the 1.25" mast I have in the V58 now (I will be shortening the V58 mast to a foot or two long). I am reasonably sure I have enough various bits and pieces tucked away in my workshop or shed to come up with something.

[QUOTE="TimmyTheTorch, post: 815171, member: 64271"] Time for another speed bump. The M104C takes a mast size of 2" OD. That's a good fit for the Yaesu rotor and thrust bearing I have. The M104 is being mounted horizontally and the M58 will be just above it without the ground plane radials. The V58 takes a 1.25" mast so I need to be able to reduce the 2" aluminum mast extending just past the M104C into the 1.25" mast I have in the V58 now (I will be shortening the V58 mast to a foot or two long). I am reasonably sure I have enough various bits and pieces tucked away in my workshop or shed to come up with something. [/QUOTE]

Top Bottom