You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I have a mast with an OD of 2-3/8" and need to connect guy wires to it. I am hoping three will suffice but we'll see.

Has anyone come across a guy wire ring like this that will fit a 2-3/8" mast? So for the largest one I can find only goes up to a 2-1/4" mast like the EZ-Up pictured below.

I'm also open to other suggestions on how to connect a guy wire to a mast that does not require drilling holes through the mast. I am hoping to not create additional weak points.

If I can't find one I may just try this one out and replace the eye bolts with longer ones.

[ATTACH=full]63610[/ATTACH]

[QUOTE="TimmyTheTorch, post: 815544, member: 64271"] I have a mast with an OD of 2-3/8" and need to connect guy wires to it. I am hoping three will suffice but we'll see. Has anyone come across a guy wire ring like this that will fit a 2-3/8" mast? So for the largest one I can find only goes up to a 2-1/4" mast like the EZ-Up pictured below. I'm also open to other suggestions on how to connect a guy wire to a mast that does not require drilling holes through the mast. I am hoping to not create additional weak points. If I can't find one I may just try this one out and replace the eye bolts with longer ones. [ATTACH type="full" alt="1682436444125.png"]63610[/ATTACH] [/QUOTE]

Top Bottom