You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Before I take anything back down..
WITH a low pass filter inline and as it sits the SWR in the radio sees nothing. After amp to the meters and switch sees less than 1.5 across band and after the switch to the VQ3 is not even readable a tiny flicker. These readings are with full power applied.
You think it's worth pulling this heavy monster down again? This isnt an 8 pound quad but about 30 pounds w VQ3 and rotor at the top of 20 foot pushup pole.
When it starts to go its like hanging on to a rodeo bull.

[QUOTE="lonestarbandit, post: 773343, member: 2489"] Before I take anything back down.. WITH a low pass filter inline and as it sits the SWR in the radio sees nothing. After amp to the meters and switch sees less than 1.5 across band and after the switch to the VQ3 is not even readable a tiny flicker. These readings are with full power applied. You think it's worth pulling this heavy monster down again? This isnt an 8 pound quad but about 30 pounds w VQ3 and rotor at the top of 20 foot pushup pole. When it starts to go its like hanging on to a rodeo bull. [/QUOTE]

Top Bottom