You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

marconi, if you modeled a 5/8 wl end fed with thick tubing such as the I10k vs a 5/8 of thin wire the size such as the a99 uses, i wonder what that would show?....on a center fed, i would think the ground or counterpoise currents would be balanced, but much higher on the end fed, but i could be wrong, the model may help.

just some thoughts. good day.

[QUOTE="gamegetter, post: 564150, member: 14621"] marconi, if you modeled a 5/8 wl end fed with thick tubing such as the I10k vs a 5/8 of thin wire the size such as the a99 uses, i wonder what that would show?....on a center fed, i would think the ground or counterpoise currents would be balanced, but much higher on the end fed, but i could be wrong, the model may help. just some thoughts. good day. [/QUOTE]

Top Bottom