You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I think this is the model you requested in red above. I changed the dimensions for the model I posted earlier, "NB idea for extending top hat" with no Top Hat, which I did for a report on current distribution. Because the project was to show the current data for wire #3, I reduced the segments to 20, just for convenience in showing the report. That likely reduced the gain a bit. I fixed the model back to its normal segment count for wire #3, which is 100, so that may make a little increase in the model you requested.

[ATTACH]6435[/ATTACH]

[QUOTE="Marconi, post: 344334, member: 903"] I think this is the model you requested in red above. I changed the dimensions for the model I posted earlier, "NB idea for extending top hat" with no Top Hat, which I did for a report on current distribution. Because the project was to show the current data for wire #3, I reduced the segments to 20, just for convenience in showing the report. That likely reduced the gain a bit. I fixed the model back to its normal segment count for wire #3, which is 100, so that may make a little increase in the model you requested. [ATTACH]6435.vB[/ATTACH] [/QUOTE]

Top Bottom