You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Seems to me that last one we did used a two-section F&T, LCR, JJ 100uf 500v like we use in the Tram D201. Had to drill the two holes to mount the saddle clamp.

The two 5 uf sections? A tie strip mounts on one of the saddle clamp's screws under the deck. A 4.7uf 450V radial cap each goes to a lug with the blue wire, the other cap on a lug with the red and gray wires.

Pretty sure that's how we did it.

73

[QUOTE="nomadradio, post: 682639, member: 22"] Seems to me that last one we did used a two-section F&T, LCR, JJ 100uf 500v like we use in the Tram D201. Had to drill the two holes to mount the saddle clamp. The two 5 uf sections? A tie strip mounts on one of the saddle clamp's screws under the deck. A 4.7uf 450V radial cap each goes to a lug with the blue wire, the other cap on a lug with the red and gray wires. Pretty sure that's how we did it. 73 [/QUOTE]

Top Bottom