You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Any one of the four [USER=52309]@Handy Andy[/USER] . This was actually the first. before the replacement sprockets from NR6C.
Notice all of the sprockets are cracked and I had tried (unsuccessfully) to clamp them their hubs with circlips. Complete waste of time.
I then installed it all one detent off.
Then once the sprockets arrived I installed it again, one detent off.
On the final and successful assembly I found the 27 to 27.5MHz segment on the bandswitch.
I got real good at removing and installing the front face.

[QUOTE="kopcicle, post: 725170, member: 46722"] Any one of the four [USER=52309]@Handy Andy[/USER] . This was actually the first. before the replacement sprockets from NR6C. Notice all of the sprockets are cracked and I had tried (unsuccessfully) to clamp them their hubs with circlips. Complete waste of time. I then installed it all one detent off. Then once the sprockets arrived I installed it again, one detent off. On the final and successful assembly I found the 27 to 27.5MHz segment on the bandswitch. I got real good at removing and installing the front face. [/QUOTE]

Top Bottom