You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Booty what you're suggesting might work fine, not sure though. It appears that these big verticals, using a gamma match, need the bottom section to be pretty much the same diameter for around a 1/4 wave up and then tapper. My Sigma4, Wolf .64, and I believe the Vector 4000, being similar comes to mind in such cases.

Your coil type matching scheme may not have a similar issue, but again not sure.

I'm curious how the new vertical you've been working on for a while is working out, but I won't ask again. Hopefully your snows has cleared away by now.

[QUOTE="Marconi, post: 273124, member: 903"] Booty what you're suggesting might work fine, not sure though. It appears that these big verticals, using a gamma match, need the bottom section to be pretty much the same diameter for around a 1/4 wave up and then tapper. My Sigma4, Wolf .64, and I believe the Vector 4000, being similar comes to mind in such cases. Your coil type matching scheme may not have a similar issue, but again not sure. I'm curious how the new vertical you've been working on for a while is working out, but I won't ask again. Hopefully your snows has cleared away by now. [/QUOTE]

Top Bottom