You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Eddie i can't see the wires even blown up many times,
i think what you are saying is the wire you add before you overlay the tl model is effectively the outside of the coax,

so if you were modeling a two wire open line using the tl function you would just put the ends in and we would see nothing between the two end points ,
is that what you mean ?

i have seen people talk about coax dipoles but only ever seen you model one so i have nothing to compare against.

[QUOTE="bob85, post: 744653, member: 18"] Eddie i can't see the wires even blown up many times, i think what you are saying is the wire you add before you overlay the tl model is effectively the outside of the coax, so if you were modeling a two wire open line using the tl function you would just put the ends in and we would see nothing between the two end points , is that what you mean ? i have seen people talk about coax dipoles but only ever seen you model one so i have nothing to compare against. [/QUOTE]

Top Bottom