You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Yesterday I could finally use the analyzer with the 7.25’ feet long of LMR-400.

Hi Bob. What do you mean that the 1/4 wavelength jumper I made ( by the way it’ s LMR-400 ) will invert impedance , while the 1/2 wavelength will not ?

Dr._DX

These last days, I was playing with the measurements of the Vector 4000 and could drop it to 1.0 on channel 8.

L2 ( Gamma ) is set to 24 3/4” and L3, which is the top section is set to 28 3/4 “ With the analyzer close to the feed point , at 6 feet high, I had a nice dip on the SWR of 1.0 with an R = 50 and X = 0.

Tomorrow I’ll give you more readings using different coax lengths, etc.

[QUOTE="Alexis Mercado, post: 747231, member: 47391"] Yesterday I could finally use the analyzer with the 7.25’ feet long of LMR-400. Hi Bob. What do you mean that the 1/4 wavelength jumper I made ( by the way it’ s LMR-400 ) will invert impedance , while the 1/2 wavelength will not ? Dr._DX These last days, I was playing with the measurements of the Vector 4000 and could drop it to 1.0 on channel 8. L2 ( Gamma ) is set to 24 3/4” and L3, which is the top section is set to 28 3/4 “ With the analyzer close to the feed point , at 6 feet high, I had a nice dip on the SWR of 1.0 with an R = 50 and X = 0. Tomorrow I’ll give you more readings using different coax lengths, etc. [/QUOTE]

Top Bottom