You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Here is my current model of the NV4K with a physical gamma match included before and after scaling to 50 MHz. I also included the scaled model and noted some dimensions it shows...so you can make a comparison.

These dimensions all scaled in the process and I need you actual lengths and diameters Bob including all the dimensions for the gamma setup, including the dog bone L", and the offset L" at the radial hub from the center of the radiator to the center of the radial.

I will have to guess at the average element diameters for the radiator, radials, and the loop, because I will not be using taper. If you can estimate these values that might help me get closer too.

<blockquote data-quote="Marconi" data-source="post: 751797" data-attributes="member: 903">Here is my current model of the NV4K with a physical gamma match included before and after scaling to 50 MHz. I also included the scaled model and noted some dimensions it shows...so you can make a comparison.These dimensions all scaled in the process and I need you actual lengths and diameters Bob including all the dimensions for the gamma setup, including the dog bone L&quot;, and the offset L&quot; at the radial hub from the center of the radiator to the center of the radial.I will have to guess at the average element diameters for the radiator,&nbsp; radials, and the loop, because I will not be using taper. If you can estimate these values that might help me get closer too.</blockquote>

[QUOTE="Marconi, post: 751797, member: 903"] [SIZE=5]Here is my current model of the NV4K with a physical gamma match included before and after scaling to 50 MHz. I also included the scaled model and noted some dimensions it shows...so you can make a comparison. These dimensions all scaled in the process and I need you actual lengths and diameters Bob including all the dimensions for the gamma setup, including the dog bone L", and the offset L" at the radial hub from the center of the radiator to the center of the radial. I will have to guess at the average element diameters for the radiator, radials, and the loop, because I will not be using taper. If you can estimate these values that might help me get closer too.[/SIZE] [/QUOTE]

Top Bottom