You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

No Donald, I don't think you don't understand my point.

The feed point on this antenna only changes with height.

I know you just made a mistake, because I remember you telling me categorically that you modeled a Sigma 4 or a Vector 4K design, six ways from Sunday, and it was definitely a collinear antenna, not a J-Pole, and for sure was not an elevated 1/2 wave, but instead is a non-apparent collinear, whatever that means.

Do you remember what the feed point symbol in Eznec looks like? I'll give you a clue (O)

So, take a look at my model below for this antenna and see if it reminds you where the feed point actually is...on the Sigma4 design idea.

[QUOTE="Marconi, post: 754014, member: 903"] No Donald, I don't think you don't understand my point. The feed point on this antenna only changes with height. I know you just made a mistake, because I remember you telling me categorically that you modeled a Sigma 4 or a Vector 4K design, six ways from Sunday, and it was definitely a collinear antenna, not a J-Pole, and for sure was not an elevated 1/2 wave, but instead is a [B]non-apparent collinear,[/B] whatever that means. Do you remember what the feed point symbol in Eznec looks like? I'll give you a clue ([SIZE=6][COLOR=rgb(255, 0, 0)]O[/COLOR][/SIZE]) So, take a look at my model below for this antenna and see if it reminds you where the feed point actually is...[B]on the Sigma4 design idea.[/B] [/QUOTE]

Top Bottom