You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

This MOSFET replacement you posted has proved to be an inexpensive replacement solution compared to the CB-20 by Eleflow ($20!). Cost to replace all parts was less than $3 for me - if you make the biasing device yourself. I made one but didn't use it - BTW.

Removing/replacing a couple of parts wasn't that hard to do. The old glue/shmegma on the board made it hard to find L40 tho; so I traced it out using a schematic from CB Tricks.

[QUOTE="Robb, post: 479013, member: 8446"] This MOSFET replacement you posted has proved to be an inexpensive replacement solution compared to the CB-20 by Eleflow ($20!). Cost to replace all parts was less than $3 for me - if you make the biasing device yourself. I made one but didn't use it - BTW. [IMG]http://www.cbtricks.com/miscellaneous/fet_papers/inside_en369dr.gif[/IMG] Removing/replacing a couple of parts wasn't that hard to do. The old glue/shmegma on the board made it hard to find L40 tho; so I traced it out using a schematic from CB Tricks. [/QUOTE]

Top Bottom