I have a Motorola GM300 and a Moto c120 back to back with Moto. repeater interface and a Sinclair MR356 with a Samlex sec1212 all connected in a Pelican hard case with fanTx464.5500, Rx469. Can anyone tell me what they are for or age or anything? Will include photos
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Motorola repeater set-up
- Thread starter redden
- Start date
http://www.worldwidedx.com/general-...365-motorola-set-up-questions.html#post236914
As noted above, it's a portable repeater system programmed for the 460 MHz commercial business band. Not sure how old. Mptorola stopped making that model several years ago.
As noted above, it's a portable repeater system programmed for the 460 MHz commercial business band. Not sure how old. Mptorola stopped making that model several years ago.
A repeater is used to extend the range of hand held or mobile radios. They are mostly setup in permanent locations on tall buildings or towers.
The way the one you have is setup is for emergencies or special events so that it can moved from one location to the next.
I'm not sure about the other pieces but the GM300 and M120 were made in the 90s. They require software that runs in MS-DOS to program and are considered obsolete by Motorola.
The way the one you have is setup is for emergencies or special events so that it can moved from one location to the next.
I'm not sure about the other pieces but the GM300 and M120 were made in the 90s. They require software that runs in MS-DOS to program and are considered obsolete by Motorola.
...runna pile-up on 6m SSB