You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks VK

I just got done cutting all the copper. I fitted the Elbows and caps before measuring, so my measurements are "Outside to Outside" as opposed to "Center to Center"

I may just tac-solder it to try it on the Antenna analyzer, and if it is good solder it all the way up.

I also picked up some Aluminum Angle for the center support/Boom Mount and have some material to isolate the boom from the elements...

I'll be slinging solder after dinner! I can think of worse ways to waste $50 if this doesn't work! LOL

[QUOTE="Bow, post: 476736, member: 7719"] Thanks VK I just got done cutting all the copper. I fitted the Elbows and caps before measuring, so my measurements are "Outside to Outside" as opposed to "Center to Center" I may just tac-solder it to try it on the Antenna analyzer, and if it is good solder it all the way up. I also picked up some Aluminum Angle for the center support/Boom Mount and have some material to isolate the boom from the elements... I'll be slinging solder after dinner! I can think of worse ways to waste $50 if this doesn't work! LOL [/QUOTE]

Top Bottom