You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

The mic has a 81 db signal to noise ratio range - according to the specs. Should work great for most home applications tho. What were you planning to use it for? It is sensitive and will require a wind screen for any close-up work. Nice acoustic suspension included. For what you got - and especially what you paid for it - I think you got a screamin deal.

Behringer B1 Vocal Condenser Microphone Specifications
•Transducer Type: Condenser, 1 inch single diaphragm
•Operating Principle: Pressure Gradient
•Polar Pattern: Cardioid
•Connection: Gold-plated balanced XLR connector
•Open Circuit Voltage at 1kHz: -34 +/-2 dBV (0 dBV = 1 V/Pa)
•Open Circuit Sensitivity: 20 mV/Pa
•Frequency Range: 20Hz - 20kHz
•Level Attenuation: -10dB (switchable)
•Low-Cut Filter: 6dB/Octave @ 75Hz (switchable)
•Maximum SPL (1% THD @ 1kHz): 138 dB (0dB), 148dB (-10dB)
•Equivalent SPL (IEC 268-4): 13dB-A
•Signal-to-Noise Ratio RE 1 Pa: 81dB A-weighted
•Nominal Impedance: 50 Ohms
•Load Impedance: > 1 kOhm
•Supply Voltage: +48V
•Supply Current: 3 mA
•Dimensions:
◦Diameter: 2.28 inches (58 mm)
◦Length: 6.85 inches (174 mm)
•Weight: 16.26 ounces (461 g)

<blockquote data-quote="Robb" data-source="post: 164975" data-attributes="member: 8446">The mic has a 81 db signal to noise ratio range - according to the specs.&nbsp; Should work great for most home applications tho.&nbsp; What were you planning to use it for?&nbsp; It is sensitive and will require a wind screen for any close-up work.&nbsp; Nice acoustic suspension included.&nbsp; For what you got - and especially what you paid for it - I think you got a screamin deal.Behringer B1 Vocal Condenser Microphone Specifications •Transducer Type: Condenser, 1 inch single diaphragm•Operating Principle: Pressure Gradient•Polar Pattern: Cardioid•Connection: Gold-plated balanced XLR connector•Open Circuit Voltage at 1kHz: -34 +/-2 dBV (0 dBV = 1 V/Pa)•Open Circuit Sensitivity: 20 mV/Pa•Frequency Range: 20Hz - 20kHz•Level Attenuation: -10dB (switchable)•Low-Cut Filter: 6dB/Octave @ 75Hz (switchable)•Maximum SPL (1% THD @ 1kHz): 138 dB (0dB), 148dB (-10dB)•Equivalent SPL (IEC 268-4): 13dB-A•Signal-to-Noise Ratio RE 1 Pa: 81dB A-weighted•Nominal Impedance: 50 Ohms•Load Impedance: &gt; 1 kOhm•Supply Voltage: +48V•Supply Current: 3 mA•Dimensions:◦Diameter: 2.28 inches (58 mm)◦Length: 6.85 inches (174 mm)•Weight: 16.26 ounces (461 g)</blockquote>

[QUOTE="Robb, post: 164975, member: 8446"] The mic has a 81 db signal to noise ratio range - according to the specs. Should work great for most home applications tho. What were you planning to use it for? It is sensitive and will require a wind screen for any close-up work. Nice acoustic suspension included. For what you got - and especially what you paid for it - I think you got a screamin deal. Behringer B1 Vocal Condenser Microphone Specifications •Transducer Type: Condenser, 1 inch single diaphragm •Operating Principle: Pressure Gradient •Polar Pattern: Cardioid •Connection: Gold-plated balanced XLR connector •Open Circuit Voltage at 1kHz: -34 +/-2 dBV (0 dBV = 1 V/Pa) •Open Circuit Sensitivity: 20 mV/Pa •Frequency Range: 20Hz - 20kHz •Level Attenuation: -10dB (switchable) •Low-Cut Filter: 6dB/Octave @ 75Hz (switchable) •Maximum SPL (1% THD @ 1kHz): 138 dB (0dB), 148dB (-10dB) •Equivalent SPL (IEC 268-4): 13dB-A •Signal-to-Noise Ratio RE 1 Pa: 81dB A-weighted •Nominal Impedance: 50 Ohms •Load Impedance: > 1 kOhm •Supply Voltage: +48V •Supply Current: 3 mA •Dimensions: ◦Diameter: 2.28 inches (58 mm) ◦Length: 6.85 inches (174 mm) •Weight: 16.26 ounces (461 g) [/QUOTE]

Top Bottom