• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Thanks ! One thing I wanted to add about the DSP-1100 EQ is that it doesn't have an XLR input or output on the back. Just TRS (stereo plug) . I found an adapter as I needed an XLR fitting to connect to the output for my Heil Yaesu XLR to 8 pin cable. This cable connects to the radio mic connector from the EQ "out" . Here is the adapter that makes that possible-



As I said I used a balanced cable ( XLR on both ends , male and female ends, from the mic to the DSP-110 "mic in" . Then I used a balanced TRS cable (1/4 stereo plugs on both ends not a mono plug) from the "line" out from the DSP-110 to the input on the EQ .

Here is the front view of the DSP-110 -



Here is the rear view-



On the input above you want the button pushed "in" for "mic" . On the output with the cable I used the button is in the "out" position.


Here is where I got some settings for the DSP-1100 EQ-


NU9N - Behringer DSP-1100 DSP-1124 ESSB SSB Hi-fi Audio Setup


Top Bottom