You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Im sorry I wasn't clear on this-- OOPS!

The beam will only be 5 feet higher than the roof mounted tower (Glen Martin RT-936/9 feet tall)-- I will be using a T2X tailtwister rotor, and a Jogunn GS-065 heavy duty thrust bearing. The omnidirectional antenna will be mounted on the top of the 24 foot mast. The omnidirectional antenna has radials coming out at a downward angle-- I need the radials to have a good distance between the omni antennas radials and the boom on the horizontal beam. Thats the reason for the 24 foot long mast.

here is a pic of my omnidirectional antenna. (please notice where the mast attaches)

Charlie

[QUOTE="Maniac373, post: 144485, member: 8167"] Im sorry I wasn't clear on this-- OOPS! The beam will only be 5 feet higher than the roof mounted tower (Glen Martin RT-936/9 feet tall)-- I will be using a T2X tailtwister rotor, and a Jogunn GS-065 heavy duty thrust bearing. The omnidirectional antenna will be mounted on the top of the 24 foot mast. The omnidirectional antenna has radials coming out at a downward angle-- I need the radials to have a good distance between the omni antennas radials and the boom on the horizontal beam. Thats the reason for the 24 foot long mast. here is a pic of my omnidirectional antenna. (please notice where the mast attaches) [IMG]http://i40.tinypic.com/2d18bo8.jpg[/IMG] Charlie [/QUOTE]

Top Bottom