well you're not likely to find too much info on this radio, and that is because it's not a very highly prized CB radio.
you're not going to be able to boost performance much, and certainly not enough to make a difference to anyone listening to you.
although you do stand a good chance of making it sound like crap if you remove the AMC.
that being said, it is your radio, and if you want to tinker with it, that is up to you.
for transmit power, adjust T11, and L3.
do not adjust them for max deadkey.
you must adjust them using a modulated signal, like a tone through the mic, or saying "ahhh" into it while peaking the adjustments.
again, you're not going to see too much improvement, and to make a 1 S-unit difference on someone else's meter, you would have to step up to 10 watts from 2.5.
the modulation limiter is Q12, and if you decide to try removing it to see how it sounds, i highly recommend that you unsolder and remove the part completely rather than just cutting it out.
this way, if the radio sounds like crap after removing it, you can put it back in.
best of luck,
LC
