You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

If you get into that particular one, this is what I found and would be curious what you find.

The one I mailed was a two-part ferrite. A ferrite sleeve that goes over the coil and the slug inside it. The coil form had five divisions for windings, lets call the one closest to the pins winding slot 1 and slot 5 being at the top. The outer winding was the center tapped one going from an outside leg, 2 turns in slot 2, 3 turns in slot 3, brought back to the center pin, then 3 turns in slot 4 and 2 turns in slot 5, finishing at the third pin. The untapped winding is the inside winding with 3 turns in slot 1, and 2 turns in the remaining 4 slots for a total of 11 turns.

[QUOTE="brandon7861, post: 854857, member: 53724"] If you get into that particular one, this is what I found and would be curious what you find. The one I mailed was a two-part ferrite. A ferrite sleeve that goes over the coil and the slug inside it. The coil form had five divisions for windings, lets call the one closest to the pins winding slot 1 and slot 5 being at the top. The outer winding was the center tapped one going from an outside leg, 2 turns in slot 2, 3 turns in slot 3, brought back to the center pin, then 3 turns in slot 4 and 2 turns in slot 5, finishing at the third pin. The untapped winding is the inside winding with 3 turns in slot 1, and 2 turns in the remaining 4 slots for a total of 11 turns. [/QUOTE]

Top Bottom