You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

SWR

did u know..... I'm by far a electronics expert, but i've been told that when tuning your ant. co-phased, you must use a single full length coax 50ohm and tune each ant. seperately... never try to tune hooked up co-phase because it will never come out right. tune each one in a area free from trucks and metal buildings with doors closed. and when finished hook them co phased and don't check SWR's because it will show anything but good.. just make sure your co-phased coax 75ohm, is in good working order. and WALA. your good to go....

[QUOTE="coax145, post: 324787, member: 22282"] [b]SWR[/b] did u know..... I'm by far a electronics expert, but i've been told that when tuning your ant. co-phased, you must use a single full length coax 50ohm and tune each ant. seperately... never try to tune hooked up co-phase because it will never come out right. tune each one in a area free from trucks and metal buildings with doors closed. and when finished hook them co phased and don't check SWR's because it will show anything but good.. just make sure your co-phased coax 75ohm, is in good working order. and WALA. your good to go.... [/QUOTE]

Top Bottom