You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Im sorry, i guess my results for TX are 1:1.

I dont quite understand your second question, im not quite up to all that vocab. so i will explain how i calibrated and used the meter.

hook up the meter between the antenna and the radio.
Set the meter switch to "FWD" and turn the radio on and set it to ch 1.
Key the mic and use the calibration knob to turn the needle all the way to the right to "SET"
Then with out un-keying the mic, set the meter to REF and get the SWR reading.

When i did that, i got a reading of 1:1 on both ch1 and ch40.

[QUOTE="thesatelliteguy, post: 280565, member: 19081"] Im sorry, i guess my results for TX are 1:1. I dont quite understand your second question, im not quite up to all that vocab. so i will explain how i calibrated and used the meter. hook up the meter between the antenna and the radio. Set the meter switch to "FWD" and turn the radio on and set it to ch 1. Key the mic and use the calibration knob to turn the needle all the way to the right to "SET" Then with out un-keying the mic, set the meter to REF and get the SWR reading. When i did that, i got a reading of 1:1 on both ch1 and ch40. [/QUOTE]

Top Bottom