You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

What type of transmitter are you using to broadcast the telemetry signal and how much range do you need ?? If the telemetry unit has an external antenna, raising the antenna as high as possible will increase the range. Ditto for the receiver. If you can increase the output power of the transmitter, this will help too. You are probably at the mercy of high atmospheric noise, and this will be hard to overcome with a low power transmitter. If it is possible to connect your yagi antenna to the transmitter, and use a wire antenna on the receiver this may offer some improvement too.

[QUOTE="unit_399, post: 298831, member: 7311"] What type of transmitter are you using to broadcast the telemetry signal and how much range do you need ?? If the telemetry unit has an external antenna, raising the antenna as high as possible will increase the range. Ditto for the receiver. If you can increase the output power of the transmitter, this will help too. You are probably at the mercy of high atmospheric noise, and this will be hard to overcome with a low power transmitter. If it is possible to connect your yagi antenna to the transmitter, and use a wire antenna on the receiver this may offer some improvement too. [/QUOTE]

Top Bottom