You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I could not find any information on the E-2000 but I did find lots of info on the E-200D.

Everything you need to know about setting the output level is in the operators manual.

I think you are overlooking some details associated with the terminology.
0dbm is 1 milliwatt. (0.001 watts) and that is 223 mv (0.223 v)into 50 ohms.
Anything less than 0dbm is negative. (-)
So -67 dbm would be less signal than -50 dbm.
And besides that generator is not capable of achieving the ouput level you have indicated in previous posts.

[QUOTE="RADIOOMAN, post: 415094, member: 25990"] I could not find any information on the E-2000 but I did find lots of info on the E-200D. Everything you need to know about setting the output level is in the operators manual. I think you are overlooking some details associated with the terminology. 0dbm is 1 milliwatt. (0.001 watts) and that is 223 mv (0.223 v)into 50 ohms. Anything less than 0dbm is negative. (-) So -67 dbm would be less signal than -50 dbm. And besides that generator is not capable of achieving the ouput level you have indicated in previous posts. [/QUOTE]

Top Bottom