You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Both seam to have a effect. L30 was cranked and and if it is too far one way or the other it limits my adjustment and if cranked one way or the other too far the output signal is gone. L39 has the same effect.

It does receive on the right channel though, so 27.185 Ch19 there is receive from my signal generator. but it transmits on 23.500 MHz.
So next I will check FET 7 and sniff for a signal. This one is very confusing.

[QUOTE="Low_Boy, post: 763590, member: 12157"] Both seam to have a effect. L30 was cranked and and if it is too far one way or the other it limits my adjustment and if cranked one way or the other too far the output signal is gone. L39 has the same effect. It does receive on the right channel though, so 27.185 Ch19 there is receive from my signal generator. but it transmits on 23.500 MHz. So next I will check FET 7 and sniff for a signal. This one is very confusing. [/QUOTE]

Top Bottom