You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

My radio does 30 watts dk swings up from there. It's set to 4:1 carrier to modulation.
I still come over my TV when it's muted with my 4 watt radio, but very lightly I can just hear it if i put my ear to the speakers.

One of my neighbors is 60ft away and the other is right next door.

The antenna is only 23ft in the air at the moment. Plan to get it up 10ft higher. I've grounded the antenna. It's on a fiberglass push up pole. So I grounded it to a metal pole.

I'm coming in on my TV only when muted. The neighbor said It was coming over her tv even with the TV off. It does not do this to my TV's. She has Direct TV I have cable.

Now This might sound like a stupid question, but which way do I put the PDC1089 filter in-line. The filter says IN on one side and Out on the other. I've got the CB going it to the IN side and the antenna attached to the OUT side. The only reason I question this is 'cause a tech told me to put it the other way. I notice no difference either way.

I've also done a RF choke near the antenna. I wound the coax about 6 times.

I just bought a Silver Salute mic. and now the interference is even louder.

<blockquote data-quote="4600turbo" data-source="post: 110204" data-attributes="member: 1834">My radio does 30 watts dk swings up from there. It&#039;s set to 4:1 carrier to modulation.I still come over my TV when it&#039;s muted with my 4 watt radio, but very lightly I can just hear it if i put my ear to the speakers.One of my neighbors is 60ft away and the other is right next door. The antenna is only 23ft in the air at the moment. Plan to get it up 10ft higher. I&#039;ve grounded the antenna. It&#039;s on a fiberglass push up pole. So I grounded it to a metal pole.&nbsp;I&#039;m coming in on my TV only when muted. The neighbor said It was coming over her tv even with the TV off. It does not do this to my TV&#039;s. She has Direct TV I have cable.Now This might sound like a stupid question, but which way do I put the PDC1089 filter in-line.&nbsp; The filter says IN on one side and Out on the other.&nbsp; I&#039;ve got the CB going it to the IN side and the antenna attached to the OUT side. The only reason I question this is &#039;cause a tech told me to put it the other way. I notice no difference either way.I&#039;ve also done a RF choke near the antenna. I wound the coax about 6 times. I just bought a Silver Salute mic. and now the interference is even louder.</blockquote>

[QUOTE="4600turbo, post: 110204, member: 1834"] My radio does 30 watts dk swings up from there. It's set to 4:1 carrier to modulation. I still come over my TV when it's muted with my 4 watt radio, but very lightly I can just hear it if i put my ear to the speakers. One of my neighbors is 60ft away and the other is right next door. The antenna is only 23ft in the air at the moment. Plan to get it up 10ft higher. I've grounded the antenna. It's on a fiberglass push up pole. So I grounded it to a metal pole. I'm coming in on my TV only when muted. The neighbor said It was coming over her tv even with the TV off. It does not do this to my TV's. She has Direct TV I have cable. Now This might sound like a stupid question, but which way do I put the PDC1089 filter in-line. The filter says IN on one side and Out on the other. I've got the CB going it to the IN side and the antenna attached to the OUT side. The only reason I question this is 'cause a tech told me to put it the other way. I notice no difference either way. I've also done a RF choke near the antenna. I wound the coax about 6 times. I just bought a Silver Salute mic. and now the interference is even louder. [/QUOTE]

Top Bottom