You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

This was in my early days (I'm still new) I now have a much better grasp on how to use an oscilloscope. I will get a tri-pod and demonstrate one day. it takes a little bit to learn how to use one.
I need a proper signal gen. the problem has already been explained to me, it's because I used the speaker method (a sloppy approach at that). The mic stage was "OVER-driven" by the speaker.

Didn't want to quickly "ruin" (make inoperable) the radio by touching cans I had no business toying with, after all I don't have a FSM for this one and it's a big difference between vco alignment and TX peaking.

[QUOTE="LeapFrog, post: 576141, member: 46697"] This was in my early days (I'm still new) I now have a much better grasp on how to use an oscilloscope. I will get a tri-pod and demonstrate one day. it takes a little bit to learn how to use one. I need a proper signal gen. the problem has already been explained to me, it's because I used the speaker method (a sloppy approach at that). The mic stage was "OVER-driven" by the speaker. Didn't want to quickly "ruin" (make inoperable) the radio by touching cans I had no business toying with, after all I don't have a FSM for this one and it's a big difference between vco alignment and TX peaking. [/QUOTE]

Top Bottom