You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

ok i also found a diode resister combo in heat shrink from the leg of tr41 to a small solder pad on the solder side of the board if i remove it the radio only swings to 5 1/2 if i put it back then it swings to 8 watts. also i did the r114 change and a friend recorded me talking when he played it back it sounded clean and natural voice quality. also they change the 5 pin mike jack to 4 pin
they tide the sw-common wire with the shield wire does that sound right. or should it be just the shield wire to pin 1 or just the sw-common if i turn the amp on i have to run the mike gain at 10 oclock anything higher and she squeals.???

[QUOTE="1iwilly, post: 267677, member: 8378"] ok i also found a diode resister combo in heat shrink from the leg of tr41 to a small solder pad on the solder side of the board if i remove it the radio only swings to 5 1/2 if i put it back then it swings to 8 watts. also i did the r114 change and a friend recorded me talking when he played it back it sounded clean and natural voice quality. also they change the 5 pin mike jack to 4 pin they tide the sw-common wire with the shield wire does that sound right. or should it be just the shield wire to pin 1 or just the sw-common if i turn the amp on i have to run the mike gain at 10 oclock anything higher and she squeals.??? [/QUOTE]

Top Bottom