You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

About to bring some new life into a couple old Pride Dx-300. Love them Nomad boards!
Just wondering if anyone has tried to use a blower like used in the larger Ameritron amplifiers in a Dx300.
Looking at the size in the diagram it might just be able to be made to work.
35cfm is better then the 13 or so cfm you get using the common dayton blower that normally gets used as a replacement.
Going to be using a 8930 / dx393 tube and just wanting better cooling.
Hate to desecrate the back panel mounting a blower like I've seen some do.
Any suggestions?
Thanks Thomas

[URL unfurl="true"]https://www.ctrengineeringinc.com/ebm-blowers/[/URL]

[QUOTE="TetroideTom, post: 855130, member: 6256"] About to bring some new life into a couple old Pride Dx-300. Love them Nomad boards! Just wondering if anyone has tried to use a blower like used in the larger Ameritron amplifiers in a Dx300. Looking at the size in the diagram it might just be able to be made to work. 35cfm is better then the 13 or so cfm you get using the common dayton blower that normally gets used as a replacement. Going to be using a 8930 / dx393 tube and just wanting better cooling. Hate to desecrate the back panel mounting a blower like I've seen some do. Any suggestions? Thanks Thomas [URL unfurl="true"]https://www.ctrengineeringinc.com/ebm-blowers/[/URL] [/QUOTE]

Top Bottom