You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I did a homemade tilt/telescopic pipe mast. It's kind of raw but it works. I used pipe i already had and a section of scaffolding. It folds at the bottom and then the top section is slid inside the middle section. I drilled and tapped the middle section to hold the top slide section and once standing it mounts to the house. Home brew ingenuity but it works.

Here's a few photos of when I was in the early stages of it and a few after I got the antenna up.

[QUOTE="Eldorado828, post: 855612, member: 46753"] I did a homemade tilt/telescopic pipe mast. It's kind of raw but it works. I used pipe i already had and a section of scaffolding. It folds at the bottom and then the top section is slid inside the middle section. I drilled and tapped the middle section to hold the top slide section and once standing it mounts to the house. Home brew ingenuity but it works. Here's a few photos of when I was in the early stages of it and a few after I got the antenna up. [/QUOTE]

Top Bottom