You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

This thread has gone too far in the other direction.

Several of the newer rigs mentioned sound muffled on AM due to inadequate bandpass. 6KHZ spec filters are too narrow to transmit through on AM.

Others will not make 100% positive modulation due to software limitations.

Most riceburners need a few circuit changes to make decent AM. Anything with DSP that isn't a flex should be left off the list.

If some guy on the other end tells you your TS-2000 or 756 Pro sounds exactly like a plate modulated rig he is probably using a narrow receiver that needs a new audio output tube.

AM takes a little work unless you buy a Flex. No way around it.

[QUOTE="HiDef, post: 175867, member: 7734"] This thread has gone too far in the other direction. Several of the newer rigs mentioned sound muffled on AM due to inadequate bandpass. 6KHZ spec filters are too narrow to transmit through on AM. Others will not make 100% positive modulation due to software limitations. Most riceburners need a few circuit changes to make decent AM. Anything with DSP that isn't a flex should be left off the list. If some guy on the other end tells you your TS-2000 or 756 Pro sounds exactly like a plate modulated rig he is probably using a narrow receiver that needs a new audio output tube. AM takes a little work unless you buy a Flex. No way around it. [/QUOTE]

Top Bottom