You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

C2, if you're serious, I've been building a home made 1/4 wave antenna using 102" whips for the radiator and radials for some years now. I use a mobile L-bracket attached to an aluminum tube that will allow an A99 GPK hub to slide on...just below for the L-bracket.

I have a hub that will allow three radials at about 25* degrees, and I have a stock A99 hub with 3 slanted radial ports, and 4 horizontal ports. I call this my Marconi x.

It works very well and the match is very good.

Here is a picture of the base of the antenna on a short mast without the whips.

[ATTACH]13447[/ATTACH]

[QUOTE="Marconi, post: 482025, member: 903"] C2, if you're serious, I've been building a home made 1/4 wave antenna using 102" whips for the radiator and radials for some years now. I use a mobile L-bracket attached to an aluminum tube that will allow an A99 GPK hub to slide on...just below for the L-bracket. I have a hub that will allow three radials at about 25* degrees, and I have a stock A99 hub with 3 slanted radial ports, and 4 horizontal ports. I call this my Marconi x. It works very well and the match is very good. Here is a picture of the base of the antenna on a short mast without the whips. [ATTACH]13447.vB[/ATTACH] [/QUOTE]

Top Bottom