You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

DB, I have no problem with speculating on problems, but my whole point is you have your model set with the Ground Type = Perfect. I'm not referring to soil types.

Set your Ground type to Zero, and leave the soil type alone. Then remove one wire at a time and check the results. I think you will see very little change in the gain, angle, match, and SWR. If you remove the other 3 wires I think you will see the same or very similar results from the model.

If this happens with you like it does with me...you should realize the added wires do nothing.

The model I posted does not have added wires.

[QUOTE="Marconi, post: 498384, member: 903"] DB, I have no problem with speculating on problems, but my whole point is you have your model set with the Ground Type = Perfect. I'm not referring to soil types. Set your Ground type to Zero, and leave the soil type alone. Then remove one wire at a time and check the results. I think you will see very little change in the gain, angle, match, and SWR. If you remove the other 3 wires I think you will see the same or very similar results from the model. If this happens with you like it does with me...you should realize the added wires do nothing. The model I posted does not have added wires. [/QUOTE]

Top Bottom