You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

DB, I finally got your model working, or at least close enough to see what you did.

I found the 4Nec2 editor scheme for the NEC Editor wires on YouTube and it was a little different configuration than Eznec, but it showed the headers for each column.So I was able to add your wire descriptions by hand instead of importing your file. I still have that to try and figure out.

I was very surprised to see that you added a wire, but you connected the wire to the radial at both ends and made the radials into skinny quads or folded dipole shaped radials. I just imagined the idea that you and Bob came up with, at best, more like parasitic wires and that is what I did in my model. I was really surprised to see such a difference in ideas.

BTW, where did I get the idea you did you model in mm's? Was it in the model that came across to Eznec that did not look like an antenna?

See both our models below. As a note the radiator on my model is 27+' feet tall and your model's radiator looks to be nearly 36' tall??????????????

<blockquote data-quote="Marconi" data-source="post: 499068" data-attributes="member: 903">DB, I finally got your model working, or at least close enough to see what you did.I found the 4Nec2 editor scheme for the NEC Editor wires on YouTube and it was a little different configuration than Eznec,&nbsp; but it showed the headers for each column.So I was able to add your wire descriptions by hand instead of importing your file. I still have that to try and figure out.I was very surprised to see that you added a wire, but you connected the wire to the radial at both ends and made the radials into skinny quads or folded dipole shaped radials. I just imagined the idea that you and Bob came up with, at best, more like parasitic wires and that is what I did in my model. I was really surprised to see such a difference in ideas.BTW, where did I get the idea you did you model in mm&#039;s? Was it in the model that came across to Eznec that did not look like an antenna?See both our models below. As a note the radiator on my model is 27+&#039; feet tall and your model&#039;s radiator looks to be nearly 36&#039; tall??????????????</blockquote>

[QUOTE="Marconi, post: 499068, member: 903"] DB, I finally got your model working, or at least close enough to see what you did. I found the 4Nec2 editor scheme for the NEC Editor wires on YouTube and it was a little different configuration than Eznec, but it showed the headers for each column.So I was able to add your wire descriptions by hand instead of importing your file. I still have that to try and figure out. I was very surprised to see that you added a wire, but you connected the wire to the radial at both ends and made the radials into skinny quads or folded dipole shaped radials. I just imagined the idea that you and Bob came up with, at best, more like parasitic wires and that is what I did in my model. I was really surprised to see such a difference in ideas. BTW, where did I get the idea you did you model in mm's? Was it in the model that came across to Eznec that did not look like an antenna? See both our models below. As a note the radiator on my model is 27+' feet tall and your model's radiator looks to be nearly 36' tall?????????????? [/QUOTE]

Top Bottom