You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thank you for the reply and the comment. I appreciate it. However, I highly doubt it. Because as I mentioned, I used a 100uA and it was too small. And a 1A is so large that the needle does not even move. I think it's somewhere around 200uA to 500uA. Or maybe even 150uA..... Unless I do use either a 50uA or 100uA and then use a resistor but would not know what the correct resistor value would be.

Thank you though and if you come up with any other info please post.

[QUOTE="RFEverywhere, post: 484945, member: 40484"] Thank you for the reply and the comment. I appreciate it. However, I highly doubt it. Because as I mentioned, I used a 100uA and it was too small. And a 1A is so large that the needle does not even move. I think it's somewhere around 200uA to 500uA. Or maybe even 150uA..... Unless I do use either a 50uA or 100uA and then use a resistor but would not know what the correct resistor value would be. Thank you though and if you come up with any other info please post. [/QUOTE]

Top Bottom