• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Radioddity CB-27 CB Radio Mobile Radio | AM/FM |

No demand for SSB? That's pretty much 180 degrees opposite of what my experience tells me.

It would be ideal to see the FCC allow FM on CB, as is allowed in Europe, and for there to be an AM/FM/SSB version of little radio like this one.

As far as portable with SSB and legal under current rules: my Cherokee AH100 continues to fit the bill and perform well.
 
  • Like
Reactions: Rwb
I have noticed it is a chore to get these to modulate the 8W carrier in AM on the high power setting...

But in truth, 8W vs 4 watts carrier isn't worth it on the RX end, if you want to be stronger, get a better Antenna setup, and put an amp behind it...
i actually turned mine down to 6 watts and worked on modulation.got out fine
 
  • Like
Reactions: Bow
I can believe that...

I think that setting is mainly for the European FM users, because in AM, a 8 watt carrier versus 4W ... well, the juice isn't worth the squeeze, IMHO
only reason i did it ,i was at home not working due to weather so i set down and took my time.it talked fine but it became a better radio,traded it in on a new bearcat 980
 
  • Like
Reactions: Bow
No demand for SSB? That's pretty much 180 degrees opposite of what my experience tells me.

It would be ideal to see the FCC allow FM on CB, as is allowed in Europe, and for there to be an AM/FM/SSB version of little radio like this one.

As far as portable with SSB and legal under current rules: my Cherokee AH100 continues to fit the bill and perform well.
no extra channels ,but my bearcat 980 i traded my itty bitty radio is much more refined.im thinking how to bypass the power coil and use a dial to go max or minum watts to drive an amp
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ kopcicle:
    If you know you know. Anyone have Sam's current #? He hasn't been on since Oct 1st. Someone let him know I'm looking.
  • dxBot:
    535A has left the room.
  • @ AmericanEagle575:
    Just wanted to say Good Morning to all my Fellow WDX members out there!!!!!