• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

RCI 29XX series

rewire

Member
Jan 29, 2011
3
0
11
Does anyone know where to get the main cpu modules for these radios. Myself and a number of other operators have been looking but no luck. The setup is the same for most of these (2950, 2970, 2517, etc) and the modules can be interchanged with little or no changes. One would think with this module being the very downfall of this series, someone would have surplus modules for aftermarket sales. Any help would be greatly appreciated.
 


Write your reply...
dxChat
Help Users
  • No one is chatting at the moment.
  • @ Geoexplorer69:
    Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
  • @ Geoexplorer69:
    Is 30 ohms worth worrying about in a 100’ run of rg8u ?


      You do not have the permission to use the chat.