You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I was talking on the unit the other day and all at once my clearifier was off. I had to move it to the 3pm position to RX/TX on freq. I took the cover off and my power supply is only producing 11v plugged in radio off. 10.5 v radio on RX and 9.8 on w/MOD TX SSB. I do not have a service manual for this unit. I do have the correct schematic. Does anyone know where I should start looking in the power supply. Currently nothing appears to be burnt or bad solder joints. The caps were replaced about 2 months ago. Just thought I would ask in here before I just start removing and testing each part.

73

Rich

[QUOTE="RichardHartman, post: 785317, member: 54277"] I was talking on the unit the other day and all at once my clearifier was off. I had to move it to the 3pm position to RX/TX on freq. I took the cover off and my power supply is only producing 11v plugged in radio off. 10.5 v radio on RX and 9.8 on w/MOD TX SSB. I do not have a service manual for this unit. I do have the correct schematic. Does anyone know where I should start looking in the power supply. Currently nothing appears to be burnt or bad solder joints. The caps were replaced about 2 months ago. Just thought I would ask in here before I just start removing and testing each part. 73 Rich [/QUOTE]

Top Bottom