You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

The radio and power supply have been recapped 2 months ago. The power supply was upgraded to 4700uf 50v.

With the voltmeter connected / cb power switch off / plug in the power supply it will register 13.8 for a millisecond and then sits at 11v. Switch power on and it drops to 10.5 volts. This is when I checked it yesterday.

If I take out the fuse will that be enough separation to check supply without the radio connected or will I need to unsolder the ground also?

73

Richard

[QUOTE="RichardHartman, post: 785322, member: 54277"] The radio and power supply have been recapped 2 months ago. The power supply was upgraded to 4700uf 50v. With the voltmeter connected / cb power switch off / plug in the power supply it will register 13.8 for a millisecond and then sits at 11v. Switch power on and it drops to 10.5 volts. This is when I checked it yesterday. If I take out the fuse will that be enough separation to check supply without the radio connected or will I need to unsolder the ground also? 73 Richard [/QUOTE]

Top Bottom