You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hey all, I need to know if one can use unsulated wire for the reflector wire on a beam. The reason I am asking, I have a bunch of 12ga solid copper insulated wire. If I strip a 2 or 3 inch piece of wire where it will be connected to the reflector elements and leave the insulating on the rest, would this be OK? Wire is not that expensive, so if bare wire is the way to go - I need to know.

Thanks, Hossless

</p>

[QUOTE="hossless, post: 19275"] Hey all, I need to know if one can use unsulated wire for the reflector wire on a beam. The reason I am asking, I have a bunch of 12ga solid copper insulated wire. If I strip a 2 or 3 inch piece of wire where it will be connected to the reflector elements and leave the insulating on the rest, would this be OK? Wire is not that expensive, so if bare wire is the way to go - I need to know. Thanks, Hossless </p>[i][/i] [/QUOTE]

Top Bottom