You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

So I went ahead and performed all of the steps for alignment that I could with no change. The voltages at the 6AQ5 tube pins ( V9 and V10) are spot on. There are some issues with the 12BH7 final tube values though. Here are the numbers for it. The first number is the value in the Sam's. The second value is what I have.

12BH7
Pin 1 180vdc : 145vdc
Pin 2 -18vdc : +10vdc
Pin 3 15vdc : 9vdc
Pin 6 13vdc : 14vdc
Pin 7 160vdc : 166vdc
Pin 8 180vdc : 200vdc

I'm not sure if this is important or irrelevant to my issue. Thanks!

[QUOTE="Champo, post: 774642, member: 60887"] So I went ahead and performed all of the steps for alignment that I could with no change. The voltages at the 6AQ5 tube pins ( V9 and V10) are spot on. There are some issues with the 12BH7 final tube values though. Here are the numbers for it. The first number is the value in the Sam's. The second value is what I have. 12BH7 Pin 1 180vdc : 145vdc Pin 2 -18vdc : +10vdc Pin 3 15vdc : 9vdc Pin 6 13vdc : 14vdc Pin 7 160vdc : 166vdc Pin 8 180vdc : 200vdc I'm not sure if this is important or irrelevant to my issue. Thanks! [/QUOTE]

Top Bottom